Application:
Oturn CNC machine special for Valve is mainly used in processing Valve, Pump body, Auto parts, Construction machinery parts etc.It can work for many procedures,for example, End face, The outer circle, The front edge,Inner hole, Grooving, Screw thread, Bore-hole and Sphere.It worked with Oturn CNC Controller(or Siemens,Guangzhou CNC Controller), It can realize automation, high precision, multi variety and mass production.
Contact info:
Mr.Edsion
Mobile:0086 133 4513 6959
Website:www.oturnmachinery.com
Main features:
1,This machine worked with Oturn PLC Controller, it can work for many procedures,for example, End face hole , Median orifice, Bore-hole and Sphere. It's CNC Controller has good compatibility, powerful function and easy operation.
2,The Feed Sliding table guideway use high quality gray cast iron,trough rough casting, tempering and aging treatment by three times. Fully eliminate the residual internal stress, The surface of the guide way adopts super audio quenching and the hardness is up to HRC55. Through high precision guide way grinding processing, to ensure the accuracy, rigidity, stability.
3,The transmission part adopts precision ball screw and interpolation to eliminate the gap,to ensure the machine drive steady.
4,The power head is equipped with three - stage manual speed change with powerful motor,achieve low speed but high torque, can withstand heavy cutting load, improve processing efficiency.
5,The working equipment adopts Hydraulic pressure-automatic clamping, to improve efficiency and reduce labor intensity.
6,The machine adopts Centralized lubrication, to ensure that the full lubrication of each moving parts then improve the service life of machine tools.
Specifcation:
Specification |
OT-330BX & OT-330B |
Voltage |
380AC |
Power(13kw) |
5.5kw×3 |
Feed motor |
130BYG350 |
Spindle speed(r/min) |
110 140 190 (spindle can choose stepless speed change optional) |
Distance from spindle to table(mm) |
385 |
Spindle nose taper |
1:20 |
Max. machining length(mm) |
850 |
Max. machining diameter (mm) |
480 |
Suit for valves type |
Sluice valve DN50-DN300
Suitable for machining end face, excircle, thread, waterproof wire,chamfer |
Z axis travel(mm) |
350 |
X axis travel(mm) |
150 |
Rapid traverse speed (mm/min) |
X: 3000 Z:3000 |
Repeated positioning accuracy |
X: 0.01 Z:0.015 |
Clamping type |
Hydraulic clamping |
Controller |
HMT818
(the controller can be changed according to customer requirement) |
Rail width(mm) |
82 |
Bed width(mm) |
600 |
Cover type |
Full cover |
Cover type |
Semi-cover |
Lubrication type |
Electronic integrate lubrication |
Dimension(mm) |
4200×2000×1900 |
Dimension(mm) |
3000×2000×1900 |